收藏本站 | 设为

服务热线:18596277123

News and information

联系我们

地址:山东省德州市陵县经济开发区
联系人:王经理
手机:18596277123
电话:0534-8285863
传真:0534-8285863
邮箱:1448319145@qq.com
当前位置: > > 行业动态

行业动态

油田防渗膜焊接调节及故障排除英文翻译

文章来源:cstgb 更新时间:2019-01-26 11:01:31

  根据油田防渗膜的不同厚度,可通过切换调节油田防渗膜焊接螺杆来调节压力大小。顺时针方向增加,逆时针方向减少。

  油田防渗膜焊接常见故障及排除

现象原因消除

电机不能转动

非电源方向检查电源是否接通

保险线烧损更换保险线

高速线路板线路的损坏

通过燃烧改变加速电路板

电机烧坏,更换电机

电机超速旋钮不超速,超速旋钮不严

动力管被震坏了,更换了超速接线板。

不发热热楔烧损电线管更换电线管

温控仪损坏更换温控仪

带故障的热电偶更换热电偶

热楔烧损温控仪的损坏改变了温控仪

vi. The adjustment of the Pressure wheel 

According to the various thickness of material, it can be adjusted the magnitude of pressure by switching the modulated screw. It will increase by clockwise, and it decrease by anticlockwise. 

vii. The Familiar Malfunction  and elimination

Phenomena Reason The was of eliminate 

NO turning of the electric machine

Non direction of power supply Check the power supply whether it  is connected or not

The damage of Insurance wire by burning Change the insurance wire

The damage of speeding circuitry board lines

By burning Change the speeding circuitry board

The damage of electric machine by  burning Change the electric machine

Non speeding of the electric machine Speeding knob is untightly Tight  the  speeding knob

Power pipe was shocked out Replacing the speeding wire board

Non heating up Thermal wedge The damage of electric pipe by burning Replacing  the electric pipe

The damage of temperature control instrument Replacing the temperature control instrument

  Thermocouple with malfunction Change the thermocouple

The burning of thermal wedge The damage of temperature control instrument Change the temperature control instrument