收藏本站 | 设为

服务热线:18596277123

News and information

联系我们

地址:山东省德州市陵县经济开发区
联系人:王经理
手机:18596277123
电话:0534-8285863
传真:0534-8285863
邮箱:1448319145@qq.com
当前位置: > > 行业新闻

行业新闻

土工膜焊接机英文简介

文章来源:cstgb 更新时间:2019-01-25 15:01:18

土工膜焊接机英文简介

一、土工膜焊接机技术参数

电压(V):220伏

频率(Hz):50赫兹

功率(P):800W

焊接速度(V):0.5-5m/min

加热温度(t):0-450℃

待焊材料厚度:0.2mm-1.5mm

重叠宽度:100 mm

焊接宽度:12.5mm×2,内腔12mm

焊缝强度:≥85%母材(抗剪切拉伸),整机

重量:5公斤

绝缘等级:二级

一、土工膜焊接机注意事项

1、为了正确操作,请仔细阅读本说明书。

2、与接地的3线电源电缆和插座(具有10安容量的插座)一起使用。在相应的焊机上,L相连接到火线,N相连接到零线,相连接到接地保护线),未经事先许可不得修改插头。

3、为保证焊接质量,请指定专人操作。

4、压路机在自由运转时不接合。

5、不要在水下操作,以免质量低劣。

6、这台机器出厂前已经调好了。请不要随意调整。

7、控制箱中的电路板通电。未经授权人员事先通知,不得将其移除。

8、如果机器长期未使用或暴露在潮湿环境中,在启动前预热30分钟。

9、可进行修改以持续改进,无需事先通知。

三、土工膜焊接机主要部件

1. Technical parameters

Voltage (V): 220V

Frequency (Hz): 50Hz

Power (P): 750W

Welding speed (V): 0.5-5m/min

Heating temperature (T): 0-450℃

Thickness of material to be welded: 0.2mm-1.5mm

Overlap width: 100mm

Welding width: 12.5mm×2, interior cavity 12mm

Seam strength: ≥85% base material (tensile resistant in shear direction), complete machine

Weight: 5Kg

Insulation class: class II 

2. Precautions

1). For correct operation, please carefully read this instruction.

2). Use with grounded 3-cords mains cable and socket (socket with 10A capacity. On the corresponding welder, phase L connected to live wire, N to zero line, phase ╧ to grounded protection line), plug will not be modified without prior permission. 

3). For good welding quality, please assign specified personnel for operation.

4). Pressure roller will not engage on free running.

5). Do not operate when it is exposed to water to prevent inferior quality.

6). The machine has been regulated before leaving factory. Please do not adjust it at will.

7). Circuit board in control box is electrified. Do not remove it without prior notice to authorized personnel.

8). Preheat for 30 minutes before start up if machine has been long unused or exposed to moisture. 

9). Modifications may be made for continuous improvement, without prior notice.




3. Main components

微信图片_20190125143209.png